dmesg - MADZERGS 7-ZIP 1
efi: mem38: type=4, attr=0xf, range=[0x00000000bd0ff000-0x00000000bd318000) (2MB)
efi: mem39: type=6, attr=0x800000000000000f, range=[0x00000000bd318000-0x00000000bdff9000) (12MB)
efi: mem40: type=4, attr=0xf, range=[0x00000000bdff9000-0x00000000be000000) (0MB)
efi: mem41: type=7, attr=0xf, range=[0x0000000100000000-0x0000000840000000) (29696MB)
efi: mem42: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
efi: mem43: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
efi: mem44: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
SMBIOS 2.8 present.
DMI: ASUS All Series/X99-DELUXE, BIOS 1004 10/16/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x840000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0000C0000000 mask 3FFFC0000000 uncachable
1 base 380000000000 mask 3FC000000000 uncachable
2 base 0000BF000000 mask 3FFFFF000000 uncachable
3 base 0000C0000000 mask 3FFFF0000000 write-through
4 base 0000D0000000 mask 3FFFFE000000 write-through
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xbe000 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
init_memory_mapping: [mem 0x83fe00000-0x83fffffff]
[mem 0x83fe00000-0x83fffffff] page 1G
init_memory_mapping: [mem 0x83c000000-0x83fdfffff]
[mem 0x83c000000-0x83fdfffff] page 1G
init_memory_mapping: [mem 0x800000000-0x83bffffff]
[mem 0x800000000-0x83bffffff] page 1G
init_memory_mapping: [mem 0x00100000-0xb9bc0fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xb99fffff] page 2M
[mem 0xb9a00000-0xb9bc0fff] page 4k
init_memory_mapping: [mem 0xbd078000-0xbd078fff]
[mem 0xbd078000-0xbd078fff] page 4k
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
init_memory_mapping: [mem 0xbd0ff000-0xbd317fff]
[mem 0xbd0ff000-0xbd317fff] page 4k
BRK [0x01fd7000, 0x01fd7fff] PGTABLE
init_memory_mapping: [mem 0xbdff9000-0xbdffffff]
[mem 0xbdff9000-0xbdffffff] page 4k
BRK [0x01fd8000, 0x01fd8fff] PGTABLE
init_memory_mapping: [mem 0x100000000-0x7ffffffff]
[mem 0x100000000-0x7ffffffff] page 1G
RAMDISK: [mem 0x3ec85000-0x3fffafff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000BA740000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BA740098 0000A4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000BA770350 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000BA7401D0 03017C (v02 ALASKA A M I 01072009 INTL 20091013)
ACPI: FACS 0x00000000BC989F80 000040
ACPI: APIC 0x00000000BA770460 000138 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000BA770598 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000BA7705E0 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000BA770680 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: ASF! 0x00000000BA77EDD0 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: UEFI 0x00000000BA770718 000042 (v01 ALASKA A M I 01072009 00000000)
ACPI: BDAT 0x00000000BA770760 000030 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: HPET 0x00000000BA770790 000038 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: MSCT 0x00000000BA7707C8 000090 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: PMCT 0x00000000BA770858 000064 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SLIT 0x00000000BA7708C0 00002D (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SRAT 0x00000000BA7708F0 000E58 (v03 ALASKA A M I 00000001 INTL 20091013)
ACPI: WDDT 0x00000000BA771748 000040 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SSDT 0x00000000BA771788 00D609 (v01 ALASKA PmMgt 00000001 INTL 20120913)
ACPI: BGRT 0x00000000BA77ED98 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x0a -> Node 0
SRAT: PXM 0 -> APIC 0x0c -> Node 0
SRAT: PXM 0 -> APIC 0x0e -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x0b -> Node 0
SRAT: PXM 0 -> APIC 0x0d -> Node 0
SRAT: PXM 0 -> APIC 0x0f -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0xbfffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x83fffffff]
NUMA: Initialized distance table, cnt=1
NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x83fffffff] -> [mem 0x00000000-0x83fffffff]
Initmem setup node 0 [mem 0x00000000-0x83fffffff]
NODE_DATA [mem 0x83fff8000-0x83fffcfff]
[ffffea0000000000-ffffea0020ffffff] PMD -> [ffff88081f600000-ffff88083f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x83fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0003efff]
node 0: [mem 0x00040000-0x0009ffff]
node 0: [mem 0x00100000-0xb9bc0fff]
node 0: [mem 0xbd078000-0xbd078fff]
node 0: [mem 0xbd0ff000-0xbd317fff]
node 0: [mem 0xbdff9000-0xbdffffff]
node 0: [mem 0x100000000-0x83fffffff]
On node 0 totalpages: 8363392
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 11832 pages used for memmap
DMA32 zone: 757218 pages, LIFO batch:31
Normal zone: 118784 pages used for memmap
Normal zone: 7602176 pages, LIFO batch:31
tboot: non-0 tboot_addr but it is not of type E820_RESERVED
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x0003f000-0x0003ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xacc60000-0xacc60fff]
PM: Registered nosave memory: [mem 0xacc71000-0xacc71fff]
PM: Registered nosave memory: [mem 0xacc72000-0xacc72fff]
PM: Registered nosave memory: [mem 0xacc83000-0xacc83fff]
PM: Registered nosave memory: [mem 0xacc84000-0xacc84fff]
PM: Registered nosave memory: [mem 0xacca5000-0xacca5fff]
PM: Registered nosave memory: [mem 0xb9bc1000-0xba730fff]
PM: Registered nosave memory: [mem 0xba731000-0xba77efff]
PM: Registered nosave memory: [mem 0xba77f000-0xbc98cfff]
PM: Registered nosave memory: [mem 0xbc98d000-0xbd077fff]
PM: Registered nosave memory: [mem 0xbd079000-0xbd0fefff]
PM: Registered nosave memory: [mem 0xbd318000-0xbdff8fff]
PM: Registered nosave memory: [mem 0xbe000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xbe000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88083fc00000 s87360 r8192 d23232 u131072
pcpu-alloc: s87360 r8192 d23232 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8232690
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32615348K/33453568K available (7731K kernel code, 1200K rwdata, 3608K rodata, 1360K init, 1308K bss, 838220K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-15.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS:16640 nr_irqs:1216 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3563.607 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7127.21 BogoMIPS (lpj=14254428)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e82000 - ffffffff81e8a000)
ftrace: allocating 29288 entries in 115 pages
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-5960X CPU @ 3.00GHz (fam: 06, model: 3f, stepping: 02)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 38336583410258 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
x86: Booted up 1 node, 16 CPUs
smpboot: Total of 16 processors activated (114035.42 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xba77f000-0xbc98cfff] (35708928 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 15:08:28, date: 10/28/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC: platform does not support [PCIeHotplug]
acpi PNP0A03:03: _OSC: OS now controls [PME AER PCIeCapability]
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100
pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:2fe6] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:2fe7] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100
pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:2fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:2fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000
pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:2fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:2fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:2fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:2fb7] type 00 class 0x088000
pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000
pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000
pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000
pci 0000:ff:1e.3: reg 0x10: [mem 0x00000010-0x0000001f 64bit pref]
pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000
acpi PNP0A03:03: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfbffbfff]
pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:01.1: [8086:2f03] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:2f04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb13c000-0xfb13cfff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfb120000-0xfb12ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb13b000-0xfb13b00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfb100000-0xfb11ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfb138000-0xfb138fff]
pci 0000:00:19.0: reg 0x18: [io 0xf000-0xf01f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb137000-0xfb1373ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfb130000-0xfb133fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8d16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:8d1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb136000-0xfb1363ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8d47] type 00 class 0x060100
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb135000-0xfb1350ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
pci 0000:00:01.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [144d:a800] type 00 class 0x010601
pci 0000:04:00.0: reg 0x24: [mem 0xfb910000-0xfb911fff]
pci 0000:04:00.0: reg 0x30: [mem 0xfb900000-0xfb90ffff pref]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:00:01.1: PCI bridge to [bus 04]
pci 0000:00:01.1: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:01:00.0: [10de:13c0] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:01:00.1: [10de:0fbb] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [1b21:118f] type 01 class 0x060400
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 06-0b]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xfb200000-0xfb6fffff]
pci 0000:07:01.0: [1b21:118f] type 01 class 0x060400
pci 0000:07:01.0: PME# supported from D0 D3hot D3cold
pci 0000:07:02.0: [1b21:118f] type 01 class 0x060400
pci 0000:07:02.0: PME# supported from D0 D3hot D3cold
pci 0000:07:03.0: [1b21:118f] type 01 class 0x060400
pci 0000:07:03.0: PME# supported from D0 D3hot D3cold
pci 0000:07:04.0: [1b21:118f] type 01 class 0x060400
pci 0000:07:04.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PCI bridge to [bus 07-0b]
pci 0000:06:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:06:00.0: bridge window [mem 0xfb200000-0xfb6fffff]
pci 0000:08:00.0: [8086:1539] type 00 class 0x020000
pci 0000:08:00.0: reg 0x10: [mem 0xfb600000-0xfb61ffff]
pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f]
pci 0000:08:00.0: reg 0x1c: [mem 0xfb620000-0xfb623fff]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:07:01.0: PCI bridge to [bus 08]
pci 0000:07:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:07:01.0: bridge window [mem 0xfb600000-0xfb6fffff]
pci 0000:09:00.0: [14e4:43a0] type 00 class 0x028000
pci 0000:09:00.0: reg 0x10: [mem 0xfb400000-0xfb407fff 64bit]
pci 0000:09:00.0: reg 0x18: [mem 0xfb200000-0xfb3fffff 64bit]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:02.0: PCI bridge to [bus 09]
pci 0000:07:02.0: bridge window [mem 0xfb200000-0xfb4fffff]
pci 0000:07:03.0: PCI bridge to [bus 0a]
pci 0000:07:04.0: PCI bridge to [bus 0b]
pci 0000:0c:00.0: [1b21:1142] type 00 class 0x0c0330
pci 0000:0c:00.0: reg 0x10: [mem 0xfb800000-0xfb807fff 64bit]
pci 0000:0c:00.0: PME# supported from D3cold
pci 0000:00:1c.6: PCI bridge to [bus 0c]
pci 0000:00:1c.6: bridge window [mem 0xfb800000-0xfb8fffff]
pci_bus 0000:00: on NUMA node 0
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 2 GPEs in block 00 to 3F
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:ff:1e.3: can't claim BAR 0 [mem 0x00000010-0x0000001f 64bit pref]: no compatible bridge window
e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff]
e820: reserve RAM buffer [mem 0xacc60018-0xafffffff]
e820: reserve RAM buffer [mem 0xacc72018-0xafffffff]
e820: reserve RAM buffer [mem 0xacc84018-0xafffffff]
e820: reserve RAM buffer [mem 0xb9bc1000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbd079000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd318000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x0400-0x047f] could not be reserved
system 00:01: [io 0x0580-0x059f] has been reserved
system 00:01: [io 0x0600-0x061f] has been reserved
system 00:01: [io 0x0880-0x0883] has been reserved
system 00:01: [io 0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 3 devices
ACPI: bus type PNP unregistered
pci 0000:ff:1e.3: BAR 0: can't assign mem pref (size 0x10)
pci 0000:ff:1e.3: BAR 0: trying firmware assignment [mem size 0x00000010 64bit pref]
pci 0000:ff:1e.3: BAR 0: [mem size 0x00000010 64bit pref] conflicts with reserved [mem 0x00000000-0x00000fff]
pci_bus 0000:ff: Some PCI device resources are unassigned, try booting with pci=realloc
pci 0000:00:01.0: PCI bridge to [bus 03]
pci 0000:00:01.1: PCI bridge to [bus 04]
pci 0000:00:01.1: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:07:01.0: PCI bridge to [bus 08]
pci 0000:07:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:07:01.0: bridge window [mem 0xfb600000-0xfb6fffff]
pci 0000:07:02.0: PCI bridge to [bus 09]
pci 0000:07:02.0: bridge window [mem 0xfb200000-0xfb4fffff]
pci 0000:07:03.0: PCI bridge to [bus 0a]
pci 0000:07:04.0: PCI bridge to [bus 0b]
pci 0000:06:00.0: PCI bridge to [bus 07-0b]
pci 0000:06:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:06:00.0: bridge window [mem 0xfb200000-0xfb6fffff]
pci 0000:00:1c.3: PCI bridge to [bus 06-0b]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xfb200000-0xfb6fffff]
pci 0000:00:1c.6: PCI bridge to [bus 0c]
pci 0000:00:1c.6: bridge window [mem 0xfb800000-0xfb8fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x1000-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfbffbfff]
pci_bus 0000:04: resource 1 [mem 0xfb900000-0xfb9fffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xfb200000-0xfb6fffff]
pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:07: resource 1 [mem 0xfb200000-0xfb6fffff]
pci_bus 0000:08: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:08: resource 1 [mem 0xfb600000-0xfb6fffff]
pci_bus 0000:09: resource 1 [mem 0xfb200000-0xfb4fffff]
pci_bus 0000:0c: resource 1 [mem 0xfb800000-0xfb8fffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19928K (ffff88003ec85000 - ffff88003fffb000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xa8c60000-0xacc60000] (64MB) mapped at [ffff8800a8c60000-ffff8800acc5ffff]
microcode: CPU0 sig=0x306f2, pf=0x4, revision=0x29
microcode: CPU1 sig=0x306f2, pf=0x4, revision=0x29
microcode: CPU2 sig=0x306f2, pf=0x4, revision=0x29
microcode: CPU3 sig=0x306f2, pf=0x4, revision=0x29
microcode: CPU4 sig=0x306f2, pf=0x4, revision=0x29
microcode: CPU5 sig=0x306f2, pf=0x4, revision=0x29
microcode: CPU6 sig=0x306f2, pf=0x4, revision=0x29
microcode: CPU7 sig=0x306f2, pf=0x4, revision=0x29
microcode: CPU8 sig=0x306f2, pf=0x4, revision=0x29
microcode: CPU9 sig=0x306f2, pf=0x4, revision=0x29
microcode: CPU10 sig=0x306f2, pf=0x4, revision=0x29
microcode: CPU11 sig=0x306f2, pf=0x4, revision=0x29
microcode: CPU12 sig=0x306f2, pf=0x4, revision=0x29
microcode: CPU13 sig=0x306f2, pf=0x4, revision=0x29
microcode: CPU14 sig=0x306f2, pf=0x4, revision=0x29
microcode: CPU15 sig=0x306f2, pf=0x4, revision=0x29
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 4096 (order: 6, 262144 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1414508912.636:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 32768
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 64 for MSI/MSI-X
pcieport 0000:00:01.1: irq 65 for MSI/MSI-X
pcieport 0000:00:02.0: irq 66 for MSI/MSI-X
pcieport 0000:00:03.0: irq 67 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 68 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 69 for MSI/MSI-X
pcieport 0000:00:1c.6: irq 70 for MSI/MSI-X
pcieport 0000:06:00.0: irq 71 for MSI/MSI-X
pcieport 0000:07:01.0: irq 72 for MSI/MSI-X
pcieport 0000:07:02.0: irq 73 for MSI/MSI-X
pcieport 0000:07:03.0: irq 74 for MSI/MSI-X
pcieport 0000:07:04.0: irq 75 for MSI/MSI-X
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:01.1:pcie02: service driver aer loaded
aer 0000:00:02.0:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pcieport 0000:06:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:07:01.0: Signaling PME through PCIe PME interrupt
pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:07:02.0: Signaling PME through PCIe PME interrupt
pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:07:03.0: Signaling PME through PCIe PME interrupt
pcieport 0000:07:04.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
pci 0000:0c:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
ioapic: probe of 0000:00:05.4 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, mapped to 0xffffc90013800000, using 23040k, total 23040k
efifb: mode is 2560x1440x32, linelength=16384, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 320x90
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4 model 0x3F
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb137000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-23-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 21, io mem 0xfb136000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-23-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.16.0-23-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.16.0-23-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
xhci_hcd 0000:0c:00.0: xHCI Host Controller
xhci_hcd 0000:0c:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:0c:00.0: irq 76 for MSI/MSI-X
xhci_hcd 0000:0c:00.0: irq 77 for MSI/MSI-X
xhci_hcd 0000:0c:00.0: irq 78 for MSI/MSI-X
xhci_hcd 0000:0c:00.0: irq 79 for MSI/MSI-X
xhci_hcd 0000:0c:00.0: irq 80 for MSI/MSI-X
xhci_hcd 0000:0c:00.0: irq 81 for MSI/MSI-X
xhci_hcd 0000:0c:00.0: irq 82 for MSI/MSI-X
xhci_hcd 0000:0c:00.0: irq 83 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.16.0-23-generic xhci_hcd
usb usb5: SerialNumber: 0000:0c:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:0c:00.0: xHCI Host Controller
xhci_hcd 0000:0c:00.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.16.0-23-generic xhci_hcd
usb usb6: SerialNumber: 0000:0c:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
Intel pstate controlling: cpu 2
Intel pstate controlling: cpu 3
Intel pstate controlling: cpu 4
Intel pstate controlling: cpu 5
Intel pstate controlling: cpu 6
Intel pstate controlling: cpu 7
Intel pstate controlling: cpu 8
Intel pstate controlling: cpu 9
Intel pstate controlling: cpu 10
Intel pstate controlling: cpu 11
Intel pstate controlling: cpu 12
Intel pstate controlling: cpu 13
Intel pstate controlling: cpu 14
Intel pstate controlling: cpu 15
Consider also installing thermald for improved thermal control.
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: d120c47c14beb62ead6703d41712cc110575d297'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 2:784:134
pcieport 0000:00:03.0: hash matches
acpi device:09: hash matches
rtc_cmos 00:00: setting system clock to 2014-10-28 15:08:32 UTC (1414508912)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1360K (ffffffff81d2e000 - ffffffff81e82000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 448K (ffff880001790000 - ffff880001800000)
Freeing unused kernel memory: 488K (ffff880001b86000 - ffff880001c00000)
systemd-udevd[201]: starting version 208
random: systemd-udevd urandom read with 2 bits of entropy available
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
ahci 0000:04:00.0: version 3.0
ahci 0000:04:00.0: irq 84 for MSI/MSI-X
dca service started, version 1.12.1
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 85 for MSI/MSI-X
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.13-k
igb: Copyright (c) 2007-2014 Intel Corporation.
igb 0000:08:00.0: irq 86 for MSI/MSI-X
igb 0000:08:00.0: irq 87 for MSI/MSI-X
igb 0000:08:00.0: irq 88 for MSI/MSI-X
igb 0000:08:00.0: irq 89 for MSI/MSI-X
igb 0000:08:00.0: irq 90 for MSI/MSI-X
ahci 0000:04:00.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq led clo only pio ccc
scsi0 : ahci
ata1: SATA max UDMA/133 abar m8192@0xfb910000 port 0xfb910100 irq 84
igb 0000:08:00.0: added PHC on eth0
igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:08:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 78:24:af:8f:aa:96
igb 0000:08:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:08:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
e1000e 0000:00:19.0 eth1: registered PHC clock
e1000e 0000:00:19.0 eth1: (PCI Express:2.5GT/s:Width x1) 78:24:af:8f:a4:88
e1000e 0000:00:19.0 eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth1: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=800a
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: FORCE: horkage modified (noncq)
ata1.00: ATA-9: SAMSUNG MZHPU512HCGL-00000, UXM6401Q, max UDMA/133
ata1.00: 1000215216 sectors, multi 16: LBA48 NCQ (not used)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZHPU512 401Q PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/476 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 sda5 sda6
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=8002
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
Adding 15999996k swap on /dev/sda5. Priority:-1 extents:1 across:15999996k SSFS
systemd-udevd[420]: starting version 208
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
wmi: Mapper loaded
usb 3-6: new full-speed USB device number 2 using xhci_hcd
EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
mei_me 0000:00:16.0: irq 91 for MSI/MSI-X
cfg80211: Calling CRDA to update world regulatory domain
[drm] Initialized drm 1.1.0 20060810
AVX2 version of gcm_enc/dec engaged.
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1b.0: irq 92 for MSI/MSI-X
snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
kvm: disabled by bios
sound hdaudioC0D0: ALC1150: SKU not ready 0x00000000
sound hdaudioC0D0: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: dig-out=0x11/0x1e
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Front Mic=0x19
sound hdaudioC0D0: Rear Mic=0x18
sound hdaudioC0D0: Line=0x1a
audit: type=1400 audit(1414505313.348:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=535 comm="apparmor_parser"
audit: type=1400 audit(1414505313.348:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=535 comm="apparmor_parser"
audit: type=1400 audit(1414505313.348:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=535 comm="apparmor_parser"
audit: type=1400 audit(1414505313.348:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=565 comm="apparmor_parser"
audit: type=1400 audit(1414505313.348:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=565 comm="apparmor_parser"
audit: type=1400 audit(1414505313.348:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=565 comm="apparmor_parser"
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
audit: type=1400 audit(1414505313.360:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=580 comm="apparmor_parser"
audit: type=1400 audit(1414505313.360:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/ntpd" pid=579 comm="apparmor_parser"
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input12
asus_wmi: Disabling ACPI video driver
usb 3-6: New USB device found, idVendor=0b05, idProduct=180a
usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-6: Product: BCM20702A0
usb 3-6: Manufacturer: Broadcom Corp
usb 3-6: SerialNumber: 40E23013ABAE
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wl: module license 'MIXED/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
wl: module verification failed: signature and/or required key missing - tainting kernel
wl 0000:09:00.0: enabling device (0000 -> 0002)
usb 3-8: new full-speed USB device number 3 using xhci_hcd
wlan0: Broadcom BCM43a0 802.11 Hybrid Wireless Controller 6.30.223.248 (r487574)
usb 3-8: New USB device found, idVendor=1532, idProduct=0202
usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-8: Product: Razer DeathStalker
usb 3-8: Manufacturer: Razer
init: Error while reading from descriptor: Broken pipe
init: failsafe main process (736) killed by TERM signal
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input16
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 343.22 Thu Sep 11 16:27:43 PDT 2014
audit: type=1400 audit(1414505313.836:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=833 comm="apparmor_parser"
usb 3-9: new high-speed USB device number 4 using xhci_hcd
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: cups main process (886) killed by HUP signal
init: cups main process ended, respawning
systemd-logind[934]: New seat seat0.
systemd-logind[934]: Watching system buttons on /dev/input/event1 (Power Button)
systemd-logind[934]: Watching system buttons on /dev/input/event0 (Power Button)
usb 3-9: New USB device found, idVendor=174c, idProduct=2074
usb 3-9: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 3-9: Product: ASM107x
usb 3-9: Manufacturer: ASUS TEK.
hub 3-9:1.0: USB hub found
hub 3-9:1.0: 4 ports detected
e1000e 0000:00:19.0: irq 85 for MSI/MSI-X
e1000e 0000:00:19.0: irq 85 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
usb 3-10: new high-speed USB device number 5 using xhci_hcd
usb 3-10: New USB device found, idVendor=174c, idProduct=2074
usb 3-10: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 3-10: Product: ASM107x
usb 3-10: Manufacturer: ASUS TEK.
hub 3-10:1.0: USB hub found
hub 3-10:1.0: 4 ports detected
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Razer Razer DeathStalker as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.0/0003:1532:0202.0001/input/input17
hid-generic 0003:1532:0202.0001: input,hidraw0: USB HID v1.11 Keyboard [Razer Razer DeathStalker] on usb-0000:00:14.0-8/input0
input: Razer Razer DeathStalker as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.1/0003:1532:0202.0002/input/input18
hid-generic 0003:1532:0202.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer DeathStalker] on usb-0000:00:14.0-8/input1
input: Razer Razer DeathStalker as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.2/0003:1532:0202.0003/input/input19
hid-generic 0003:1532:0202.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathStalker] on usb-0000:00:14.0-8/input2
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
usb 4-5: new SuperSpeed USB device number 2 using xhci_hcd
usb 4-5: New USB device found, idVendor=174c, idProduct=3074
usb 4-5: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 4-5: Product: ASM107x
usb 4-5: Manufacturer: ASUS TEK.
hub 4-5:1.0: USB hub found
hub 4-5:1.0: 4 ports detected
usb 4-6: new SuperSpeed USB device number 3 using xhci_hcd
usb 4-6: New USB device found, idVendor=174c, idProduct=3074
usb 4-6: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 4-6: Product: ASM107x
usb 4-6: Manufacturer: ASUS TEK.
hub 4-6:1.0: USB hub found
hub 4-6:1.0: 4 ports detected
usb 3-10.2: new full-speed USB device number 6 using xhci_hcd
usb 3-10.2: New USB device found, idVendor=046d, idProduct=c066
usb 3-10.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-10.2: Product: G9x Laser Mouse
usb 3-10.2: Manufacturer: Logitech
usb 3-10.2: SerialNumber: E8E45B75500018
input: Logitech G9x Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.2/3-10.2:1.0/0003:046D:C066.0004/input/input20
hid-generic 0003:046D:C066.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech G9x Laser Mouse] on usb-0000:00:14.0-10.2/input0
input: Logitech G9x Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10.2/3-10.2:1.1/0003:046D:C066.0005/input/input21
hid-generic 0003:046D:C066.0005: input,hiddev0,hidraw4: USB HID v1.11 Keyboard [Logitech G9x Laser Mouse] on usb-0000:00:14.0-10.2/input1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1603) terminated with status 1
random: nonblocking pool is initialized
init: plymouth-splash main process (1627) terminated with status 1
nvidia 0000:01:00.0: irq 93 for MSI/MSI-X
igb 0000:08:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
systemd-logind[934]: Failed to start unit user@1000.service: Unknown unit: user@1000.service
systemd-logind[934]: Failed to start user service: Unknown unit: user@1000.service
systemd-logind[934]: New session c1 of user herve.
systemd-logind[934]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
systemd-hostnamed[2883]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
audit_printk_skb: 75 callbacks suppressed
audit: type=1400 audit(1414505343.908:36): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3055 comm="apparmor_parser"
audit: type=1400 audit(1414505343.908:37): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3055 comm="apparmor_parser"
audit: type=1400 audit(1414505343.928:38): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="third_party" pid=3055 comm="apparmor_parser"
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000041/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: [ 6] Bad TLP
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0018(Receiver ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00000001/00002000
pcieport 0000:00:03.0: [ 0] Receiver Error (First)